| |
locker rooms,
etc. It can be used for both interior and exterior
applications and for most applications is diluted
at a ratio of 3 parts water to 1 part DO-IT-ALL.
A diluted gallon of DO-IT-ALL
will cover 24-27 square metres (275-300 sf), depending
on the porosity of the application surface. |
| |
The
product has a multitude of exterior and interior
uses, including the following:
|
|
SURFACE |
USES |
DILUTION |
Click
here to view the
Data Sheets and
Installation Manuals
for any of our
Waterproofing
products
|
Concrete |
Seal decorative concrete on paths, driveways, etc.
to enhance the appearance and protect against stains.
Penetrating sealer on floors in warehouses, workshops,
etc. to prevent dust.
|
3 to 1
|
| |
|
|
Brick |
Forms a barrier to prevent the brick from soaking
up moisture and then freezing, which causes the
surface of the brick to flake off due
to damage due to freeze/thaw |
3 to 1
|
| |
|
|
Stucco |
Use on old, powdery stucco to seal and rejuvenate
and stop further deterioration.
|
2 to 1
|
| |
|
To
provide a clear waterproof coating and prevent the
growth of moss and mildew. |
3
to 1 |
| |
|
Apply
prior to painting to reduce the amount of paint
required. |
3
to 1 |
| |
|
|
|
| |
Cement Blocks |
Use as a clear waterproof sealer or as a base coat
prior to painting.
|
3 to 1
|
| |
|
Reduces the amount
of paint needed by 30%. |
|
| |
|
|
|
| |
Roof Shingles |
When applied as a clear top coat, will prevent the
forming of mildew and moss. |
3 to 1
|
| |
|
|
|
| |
Concrete/Clay
Roof Tiles |
Seals the tiles and restores the original glaze
to waterproof and protect from UV rays and helps
prevent moss and mildew growth. |
3 to 1
|
| |
|
|
|
| |
Roof Leaks |
Spray or brush apply to seal small roof leaks. |
2 to 1
|
| |
|
|
|
| |
Concrete Pavers
Or Interlocking
Bricks |
Seals new and existing pavers to prevent fading,
freeze/thaw damage, etc.
|
2 to 1
|
| |
Rejuvenates old
pavers and brings the colour back to life. |
3
to 1 |
| |
|
|
|
| |
Paint |
Seal areas with peeling paint – scrape off
any loose or blistered areas, apply
DO-IT-ALL and then re-paint.
Use as a base coat prior to painting in damp areas
such as kitchens and bathrooms, to prevent mold
& mildew.
Excellent as a top-coat on exterior paint to prolong
the life of the paint and prevent moss and mold
growth.
|
3 to 1
|
| |
|
|
|
| |
Wood |
Works as a primer or base-coat over old paint before
re-coating. |
3 to 1
|
| |
|
|
|
| |
Metal |
Works as a primer or base-coat over old paint before
re-coating. |
3 to 1
|
| |
|
|
|
| |
Plaster |
Use as a sealer prior to painting – reduces
the amount of paint required by 30%.
|
3 to 1
|
| |
|
|
|
| |
Drywall/Plaster Board |
Apply to the wall cavity prior to installing the
boards to prevent mold and mildew from forming. |
3 to 1
|
| Seals
board to reduce amount of paint required. |
|
| |
|
As a mildew and
mold preventative prior to painting. |
|
| |
|
|
|
